3PDT guitar FOOT SWITCH with led

FILN

  • Model: FLNST09PYZ – Z12_BA2_R
  • Voltage: 2v 2.8v
  • Current: 1A
  • Material: brass
  • Certification:CE CCC ROSH
  • Lamp color: red yellow green blue white red blue double color red yellow double color red white double color, green yellow double color, green blue double color green white double color wait a moment
  • Email: inquiry@cnylin.com.cn
  • Download PDF:  3PDT SWITCH WITH LIGHT

Description

New guitar with a light switch start formal global sales, before the guitar switch is not to bring more light, in order to be closer to the customer individuality demand, FILN designed a guitar with line with lamp switch, mounted on a sound effect on very bright spot, when people are very happy to play the music, whenever I see a guitar with lamp switch can trample down, is very convenient.

This guitar switch with light has a hole of 16MM, with 5 monochromatic colors of red, yellow, green, blue and white, as well as two colors of red, green, red and blue. It is very convenient to use. The light is led out by the wire, and the welding wire is also very convenient

Accessory name material
button Aluminum alloy
Sleeve Zinc alloy
Stud Copper alloy
Swing rod Zinc alloy
Iron shell stainless steel
Midfoot footboard Copper alloy
lampshade PC
shell PBT
Base PBT
support POM
circuit board PCB
Lamp beads led

Electrical performance:

Project Test Conditions Skills requirement
6.1 Switch rating 250V2A/125V5A
6.2 Lamp rating White light 3V20mA/red light 2V20mA/green light/3V20mA blue light 3V20mA/yellow light 2V20mA
6.3 Insulation resistance A DC500V was applied between the copper legs and between the copper legs and the outer casing, measured after one minute. ≥100MΩ
6.4 Withstand voltage Apply AC2000V between the copper foot and the outer casing, 0.5mA, 10 seconds; No breakdown or flashover.
6.5 Electrical durability Under rated load, it is operated 30 times per minute for a total of 10,000 operations. 1. Appearance and feel are acceptable;

 

2. Contact resistance ≤ 2Ω;

3. The pressure test is qualified.

7 Mechanical behavior:
7.1 Operating force The switch is placed perpendicular to the direction of operation, applying a force on one side of the button to measure the maximum force required to turn the switch on. 10-20N according to customer requirements.
7.2 Copper foot strength A 60 N static load was applied to the top of the copper foot for an inward push for 60 seconds. The terminal has no damage, falls off, and the switch function works normally.
7.3 Solderability The copper feet were immersed in a molten tin bath at a temperature of 235 ± 5 ° C for a time of 3 ± 0.5 seconds. More than 90% of the surface of the immersed portion is covered with tin.
7.4
Resistance to soldering heat The welded portion of the copper foot was immersed in a molten tin furnace at a temperature of 260 ± 5 ° C for 3 ± 1 second.
  1. The body has no obvious deformation;
  2. Mechanical performance, electrical performance test qualified.
Manual soldering iron welding, welding temperature 350 ± 5 ° C, welding time 3 ± 1 second. Do not apply pressure to the copper feet during welding.
8 Mechanical behavior:
8.1 High temperature resistance It was allowed to stand in an environment of 85 ± 2 ° C for 72 hours, and then placed in a natural environment for 1 hour and then tested. 1. Appearance and feel are acceptable;

 

2. Contact resistance ≤ 2Ω;

3. The pressure test is qualified;

Qualified mechanical performance.

8.2 Heat and humidity resistance It was placed at 40 ± 2 ° C, humidity 91% – 95% RH for 96 hours, and then placed in a natural environment for 1 hour and tested.
8.3 Low temperature resistance It was allowed to stand in an environment of -25 ± 2 ° C for 12 hours, and then placed in a natural environment for 1 hour and then tested.
8.4 Temperature alternation The temperature was alternated according to the temperature and time shown in the figure, and the test was carried out 5 times in a row and then placed in the natural environment for 1 hour.

 

Product Source: https://www.indicatorlight.com/3pdt-guitar-foot-switch-with-led/

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen